Aux Input (Aux); Compass Display; Signal Tone Volume - Harman Kardon 108TPRO Operation Manual

AUX input (Aux)

This can be used to switch on the CD changer AF con-
nections if no CD changer is connected. An external
unit (Discman, Walkman, etc.) can then be connected.
For selection, request user menu. By pressing the
multifunction key request the second plane of
->
the user menu. Using the multifunction button
select either A U X m o d e o n (on) or
o f f (off).
A U X m o d e o n
Aux Cmp BeV < _
The setting is stored automatically.
In CD mode, press the multifunction button in
Aux
order to select AUX mode.

Compass display

If route guidance is not active, it is possible to display
a compass on the right side of the display.
For selection, request user menu. By pressing the
multifunction key
the user menu. Using the multifunction key
lect either s h o w
Aux
A u x m o d e or h i d e c o m p a s s
If the compass display is switched off, 9 multifunc-
tion buttons are assigned transmitter abbreviations in
FM - DAS mode (route guidance not active).
s h o w c o m p a s s
Aux Cmp BeV
The setting is stored automatically.
request the second plane of
->
se-
Cmp
c o m p a s s (compass is displayed)
(compass is not displayed).
< _

Signal tone volume

The volume of signal tones (e.g. storage confirma-
tion) can be set using this function.
For selection, request user menu. By pressing the
multifunction key request the second plane of
->
the user menu. Press multifunction key
the right control knob , select either
(Loud).
B e e p V o l . + 5
Aux Cmp BeV < _
The setting is stored automatically.
8. User menu
. With
BeV
0 (Low) or + 5
Alert Beep
43