Setting Automatic Tracking; Deactivating The Tp; Switching Mute On/Off; Interrupting Tp Announcements - Harman Kardon 108TPRO Operation Manual

Setting automatic tracking

In all modes and wavebands, automatic tracking can
be activated by pressing for more than
TP
2 seconds.
To activate automatic tracking in the TP menu, press
multifunction key repeatedly until
Tp
pears.
T P o n
Tp Sta Vol
Note:
If a TP transmitter was already programmed directly,
it will once again be selected as the TP transmitter.
Selecting / Deleting Direct Programming
Activate the TP menu.
Selecting: Press multifunction key
S t a t :
B B C 3
T p Sta Vol
Use the right control knob to select the desired TP
transmitter. After a short delay without actuation, the
selected transmitter is applied.
34
5. Radio Mode
Deleting: Press multifunction key
S t a t :
Autoselect
Sta Vol
T p
Select
ap- A u t o s e l e c t
T P o n
and press the control to confirm. After a short delay
and without actuation, direct programming is deleted.
Quit the TP menu.

Deactivating the TP

In all modes and wavebands, TP can be turned on or
off by pressing
play changes from the inverse symbol to
To deactivate TP in the TP menu, press multifunction
key repeatedly until
Tp
T P o f f
.
Sta
Tp Sta Vol
TP is deactivated after returning to the normal dis-
play.
.
Sta
with the right control knob
for more than 2 seconds. The dis-
TP
.
T P
appears.
T P o f f

Switching Mute on/off

After selecting a TP transmitter, the mute function
can be activated by briefly pressing
T P I n f o - B B C 3
Tp Sta Vol
Thereafter, only traffic announcements and naviga-
tion announcements will be passed through. After
pressing again, muting is canceled.
TP

Interrupting TP announcements

During a TP announcement, briefly press
The current announcement is interrupted and the sys-
tem will automatically return to the previously select-
ed mode.
.
TP
.
TP