Table of Contents
Advertisement
Installation guide
Press the right rotary knob 0 to confirm the selection,
The previously entered data is displayed again. f the data entered is cor-
rect select line with data by turning the right rotary knob 0 and then
press to confirm.
If correction is necessary, select tllODIFY by turning the right rotary
knob 0 and press to confirm. The values can then be re-entered.
After confirming the tire data or the previously confirmed point STREW
SELF ClriL IEWIT
IiZN, the adjacent display appears.
After a short time, the unit switches to the main navigation menu or the
calibration ride is requested.
m
The unit is now in calibration status 2. Absolute precision
is, however, only achieved as of calibration status 3.
Status of calibration ride (iI:Rl_ 3E:fi:QT I(#.! F: I[::!E:)
In the Service Mode, select Gil, IERFiT' .K+i Fi IN5 using the right rotary
knob 0 and press to confirm.
The calibration status (e.g. ST'WIUS ii Z) and the type of positioning
(e.g. Xi) are displayed. After completing calibration, the street on
which you are currently driving is displayed (provided that it is digi-
tised) instead of i.JHEE:L and F:E!...iEF:[<E.
Testing the system components (TlJ~~it:!i_i\-E:
"~E_~:IT)
A test program automatically tests the internal components of the nayi-
gation system.
In the Service Mode, select MCCU.X TEST' using the right rotary
knob 0 and press to confirm. If 01::: is displayed, press the @ - button.
The unit switches back to the Service Mode.
Subject to correction and technical modifications
20
Copyright by Becker GmbH, D-76303 Karlsbad
Advertisement
Table of Contents
