Harman Kardon 108TPRO Operation Manual page 67

Installation guide
1 .
2 .
Subject to correction and technical modifications
1
Copyright by Becker GmbH, D-76303 Karlsbad
Contents
1.
"Symbols used in the installation guide" on page 1
2. "Safety and installation instructions" on page 1
3. "Installation of the GPS antenna" on page 2
4. "Connecting the reverse signal" on page 8
5. "Connections" on page 4
6. "Connecting the speed signal (GAL)" on page 8
7. "Installation / Removal of the Traffic Pro" on page 9
8. "Initializing GPS and Performing the Sensor Test" on page 10
9. "Installation of the Navigation Software" on page 12
10. "Calibration" on page 13
11. "Service Mode" on page 16
Symbols used in the installation guide
denotes instructions which are important for your safety and the safety of others.
m denotes instructions which are important for the installation and function of the unit.
Safety and installation instructions
@$=' The installation of TrafficPro should only be carried out by a qualified installation professional.
0
Disconnect the vehicle battery before installation of the unit.
A I 0
Note the safety instructions of the vehicle manufacturer (airbags, immobilisers etc.).
l
When routing the cables, ensure that they do not interfere with the safe operation of the vehicle and that they are
protected from damage.
l
Before installation, park the vehicle in a safe and level place and remove the ignition key.