Switching Radio Text Display On / Off; Traffic Program (Tp); Activating/Quitting The Tp Menu - Harman Kardon 108TPRO Operation Manual

Table of Contents

Advertisement

5.7. Switching radio text display on / off

Select FM radio menu mode. Use multifunction key
to switch on radio text.
Txt
Radio text is displayed.
Radio text is displayed.
.m Am
As
Pty Dis
RegTxt
The car radio filters information from the data trans-
mitted by the station and displays as radio text.
Radio text cannot be displayed unless the selected sta-
tion transmits radio text.
Unfavorable reception conditions, including interfer-
ence, can garble or even block a radio text display.
In order to quit the radio text mode, press
G
Warning
Danger of accident
-
Do not read Radio text while driving.
Please read the radio text only when the vehicle
is stationary.
As the radio text contents change constantly and
may distract the driver, radio text should only be
read when the vehicle is not in motion.

5.8. Traffic Program (TP)

If an RBDS/RDS diversity station transmits TP an-
nouncements, it is possible to have CD, CDC, and
AM operation interrupted so that the transmitted TP
announcements can be played. Moreover, you can lis-
ten to one FM station while receiving TP announce-
ments transmitted by another FM station.
There are two ways to select a TP transmitter:
- automatic tracking
- direct programming
Automatic tracking always uses the current FM sta-
tion as TP-transmitter. If the selected FM station has
poor signal quality or cannot function as a TP trans-
mitter, the unit applies specified criteria to search for
a new TP transmitter.
.
Rad
Direct programming makes it possible to have a TP
transmitter different from the current FM station. For
example, one FM station and TP announcements
transmitted by another FM station can be received si-
multaneously.
If reception from the programmed TP transmitter is
poor, the unit switches to automatic tracking until the
programmed TP transmitter is receivable.
If an RBDS/RDS station is equipped with traffic pro-
gramming, this is indicated by
in the display.
T P
An inverse
appears on the display to indicate that
the TP is active.

Activating/Quitting the TP Menu

Activating: Press the
key (not during a traffic an-
TP
nouncement).
Press multifunction key
.
Tp
T P o n
Tp
Sta Vol
Quitting: Press
, otherwise the TP menu will be
TP
automatically be terminated after 8 seconds without
actuation.
5. Radio Mode
33

Advertisement

Table of Contents
loading

Table of Contents