FALCOM MAMBO2-B6 Hardware Manual page 2

MAMBO2-B6 H M
ARDWARE
Version history:
This table provides a summary of the document revisions.
Number
Author Changes
1.0.4 F. Beqiri - Added new MAMBO2-B6.
- Removed ANT, IEEE, Bluetooth and SD-Card options (these options are no longer
available)
- 5pin mini USB connector replaced by 10pin mini-USB connector. Pinout is shown in
1.0.3 F. Beqiri
Table 6
1.0.2 F. Beqiri - Added air humidity
- The built-in GPS receiver is new one from µblox (technical data updated)
- Changed device name from MAMBO2 to MAMBO2-B6
1.0.1 F. Beqiri - Added information about the new
- Added power consumption for different power modes.
1.0.0 F. Beqiri - Initial version.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
ANUAL
below.
MAMBO2-B6
V 1.0.4
ERSION
Modified
15/08/2012
05/04/2010
30/09/2010
20/01/2009
30/05/2008
Page 2 of 28