Tera Gear 13 01 3007TG Assembly Instructions And Owner's Manual page 27

Assembly
STEP 20
A. Attach two M6x8mm Bolts (B) to the
Side Table Control Panel (14).
DO NOT TIGHTEN THE BOLTS AT THIS TIME.
B x2
B. Hang the Side Table Control Panel (14)
on the Side Table Assembly (13). Slide the
Side Table Control Panel (14) to the right until
the panel is aligned with the edge of the
Side Shelf Assembly. Tighten the bolts with
the screwdriver.
C. Adjust the Side Table Control Panel (14) so
that it is aligned with the front of the Main Control
Panel of the Fire Box Assembly(1). Attach the Side
Table Control Panel to the Fire Box Assembly using
two M6x12mm Bolts (A). Tighten the bolts with the
screwdriver.
A x2
TG3007 LP U&C-2012 FA.indd 27
14
27
13
14
12-09-26 4:06 PM