Tera Gear 13 01 3007TG Assembly Instructions And Owner's Manual page 18

Assembly
STEP 13
Attach the Side Table Handle (15)
to the Side Table Assembly (13)
using two M6x12mm Bolts (A)
placing a washer (E) on each end
between the Side Table Assembly (13)
and the M6x12mm Bolts (A).
Tighten the bolts with the screwdriver.
A x2
E x2
STEP 14
Place the Side Table Assembly (13)
on the Left Rear Leg (17) and
Left Front Leg (16) and attach
using three M6x12mm Bolts (A).
Tighten the bolts with
the screwdriver.
A x3
TG3007 LP U&C-2012 FA.indd 18
15
13
16
13
16
18
13
13
17
17
13
12-09-26 4:06 PM