PLANS OF INSTALLATION
PLANS OF INSTALLATION
All openings of a horizontal slide gate are guarded or screened from the bottom of
the gate to a minimum of 4 feet (1.22 m) above the ground to prevent a 2-1/2 inch
(57.2 mm) diameter sphere from passing through the openings anywhere in the gate,
and in that portion of the adjacent fence that the gate covers in the open position.
Track Concrete Pad
Track Concrete Pad
Gate Operator
Gate Operator
Concrete Pad
Gate Operator
Concrete Pad
10
Gate In Open Position
Gate Operator
Concrete Pad
Gate Operator
Concrete Pad
Plan of Front Installation
Gate In Open Position
Track Concrete Pad
Track Concrete Pad
Route Chain
As Shown
Gate Operator
Concrete Pad
Detail of Rear Install Chain Route
Plan of Rear Installation
Gate Operator
Figure A
Gate In Closed Position
See Detail Below
Gate
Safety Guard
Fixed Pulley
Figure B
TECHNICAL SUPPORT 1 800 908 0884
Gate In Closed Position
Parts Not Supplied by
Viking Access Systems