Optional Vikingblue™ Diagnostics Software Installation - Viking Q-4 Installation Instructions Class Ii, Class Iii, And Class Iv Heavy-Duty Commercial Vehicular Slide Ga

OPTIONAL VIKING BLUE INSTALLATION OPTIONAL VIKING BLUE INSTALLATION
Match up
Match up
White Dots
Match up
JP2
White Dots White Dots
JP2
JP2
Install
Install
Jumper
Install
Jumper Jumper
JP3
JP3
JP3
Charger Charger
Power Power
Low Battery
Check Motor
N.C.
COM
N.O.
Radio Station Radio Station
If you are using the computer:
• Hold the computer near the Gate
Operator.
• Run the application by clicking the
icon on the desktop.
• Select "Setting" in the top right of the
screen.
If you are using a PDA:
• Hold the PDA near the Gate Operator.
• Select "Start" and "Programs".
• Click the Viking-Blue Application.
• Select "Connection" on the toolbar.
30
1. Insert CD into host computer
2. Install MS ActiveSync
computer, it may already be installed
communicate with a PDA or smart phone.
3. Install Viking Blue software
Select Install Viking-Blue for PC (to have the
computer to communicate with the Operator)
Select Install Viking-Blue for PDA (to have
the PDA to communicate with the Operator)
WARNING: If this PDA is a new device, turn off
all options when syncing with the computer.
For either installation, follow the steps in the
user manual.
4. Plug the Viking Blue Module into the Viking
Gate Operator Control Board.
WARNING: Connecting the plug backwards can
result in damage to the Control Board and
will render the Viking Blue Module useless.
Use care in connecting the plug to the Control
Board. The pins are small and easily bent.
Match the white dot on the plug to the white
dot on the control board (near the JP2 legend
as depicted).
5. Install the Jumper (near the JP3 legend
depicted). Viking-Blue requires this jumper
to operate. The "Low Battery" LED will turn
ON, indicating the Control Board is ready for
use with the Viking-Blue Module.
6. Open Viking Blue software on the chosen
device.
• Click "Search" (looking for available
Viking devices).
• Select the Operator you want to
communicate with.
• Click "Connect" to start communication.
The Light on the Viking-Blue module
will turn green upon connection to the
Computer or PDA.
Follow the steps in the user manual.
TECHNICAL SUPPORT 1 800 908 0884
(check your
to