Step 5 - Power Connections - Viking Q-4 Installation Instructions Class Ii, Class Iii, And Class Iv Heavy-Duty Commercial Vehicular Slide Ga

ELECTRICAL INSTALLATION ELECTRICAL INSTALLATION
Power Connections
STEP 5
Connect the wire harness to the "OPEN RIGHT"
connector if the gate opens to the right.
Connect the wire harness to the "OPEN LEFT"
connector if the gate opens to the left.
OPEN
N E
Inside View
OPEN
Inside View
Limit Switch Connections
The Limit Switches are pre-wired. Should the
wires become disconnected, use this diagram
to reconnect them.
TECHNICAL SUPPORT 1 800 908 0884
P O
OPEN
Gate Opens Right
Gate Opens Left
Lower Limit Switch
Red
Black
Green
White
Upper Limit Switch
Upper Cam
15