Important Installation Information; Specifications - Viking Q-4 Installation Instructions Class Ii, Class Iii, And Class Iv Heavy-Duty Commercial Vehicular Slide Ga

Heavy-duty commercial vehicular slide gate operator
Table of Contents

Advertisement

IMPORTANT INSTALLATION INFORMATION

IMPORTANT INSTALLATION INFORMATION
CAUTION -
FOR USE WITH GATES OF A MAXIMUM OF 60 FT IN LENGTH AND 4000 LBS. IN WEIGHT.
WARNING - TO REDUCE THE RISK OF SEVERE INJURY OR DEATH TO PERSONS:
Do not allow pedestrian use of this gate!
55'-0"
60' maximum gate length
4000 lb.
MAX.
4000 pounds maximum gate weight

Specifications

Maximum Gate Length:
Maximum Gate Weight:
Power Requirements:
Operating Temperature:
TECHNICAL SUPPORT 1 800 908 0884
Do NOT Install the gate operator to lift gates
Locate Control Buttons:
1. Within sight of the gate,
2. At a minimum height of 5 feet so small
children are not able to reach it,
and
3. Away from the gate opening so that
someone cannot operate the controls
while in the path of the gate, and
3. Away from all moving parts of
the gate.
55 feet
4000 lbs.
120 VAC Single Phase at 6 Amps
Or
220 VAC Single Phase at 3 Amp
-20°C (-4°F) to 70°C (158°F)
OPEN
STOP
CLOSE
Control
Control
Buttons
Control
Buttons
Buttons
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H-10

Table of Contents