Wall-Mounting Instructions - ZyXEL Communications VMG8924-B10A Series User Manual

Once the connection is successfully made, the WiFi 2.4G LED shines green.
4
To turn off the wireless network, press the Wi-Fi button for one to five seconds. The WiFi 2.4G
LED turns off when the wireless network is off.

1.8 Wall-mounting Instructions

Do the following to hang your VMG on a wall.
Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
1
Hold the bracket against the wall and mark where to drill the holes.
2
Drill the two screw holes in the wall.
3
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
Align and insert the bracket to the wall-mounting notches on the rear panel of the VMG.
4
Push the bracket up to tightly attach it to the VMG.
5
Chapter 1 Introducing the VMG
VMG8924-B10A and VMG8924-B30A Series User's Guide
25