Routing; Overview; The Routing Screen - ZyXEL Communications VMG8924-B10A Series User Manual

9.1 Overview

The VMG usually uses the default gateway to route outbound traffic from computers on the LAN to
the Internet. To have the VMG send data to devices not reachable through the default gateway, use
static routes.
For example, the next figure shows a computer (A) connected to the VMG's LAN interface. The VMG
routes most traffic from A to the Internet through the VMG's default gateway (R1). You create one
static route to connect to services offered by your ISP behind router R2. You create another static
route to communicate with a separate network behind a router R3 connected to the LAN.
Figure 62 Example of Routing Topology
A
R3

9.2 The Routing Screen

Use this screen to view and configure the static route rules on the VMG. Click Network Setting >
Routing > Static Route to open the following screen.
Figure 63 Network Setting > Routing > Static Route
LAN
VMG8924-B10A and VMG8924-B30A Series User's Guide
151
C
H A PT ER
R1
WAN
R2
9

Routing