Finding Out More
See
Section 7.10 on page 118
7.2 The General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the VMG from a computer connected to the wireless LAN and
you change the VMG's SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your computer to match the VMG's new settings.
Click Network Setting > Wireless to open the General screen.
Figure 30 Network Setting > Wireless > General
Chapter 7 Wireless
for advanced technical information on wireless networks.
VMG8924-B10A and VMG8924-B30A Series User's Guide
102