Memory Name (Alphanumeric Tag); Memory Display Indicator; Beep - Alinco DR-B185HT Instruction Manual

7
PARAMETER SETTING MODE
„ „

MEMORY NAME (Alphanumeric Tag)

The memory channels stored in the memory-mode can be displayed with
an alphanumeric tag instead of the default frequency display. Program
the memory channel first.
There are 48 characters available including A-Z, 0-9.
* This menu appears only in memory mode.
1. Program at least 1 memory channel in advance. Select the memory
channel to be Memory-named and enter to the set mode by
pressing key.
FUNC
2.
Rotrate the dial or press the [UP]/
[DOWN] keys on the microphone to
display the menu number "02".
3. Press the dial so that A appears on the
display.
4. Rotate the dial to select a character to
23
be programmed.
5.
Press the dial again to edit next.
6.
Press key to correct, or
SQL
to 7 characters can be entered.
7.
Press [PTT], or
FUNC
8.
Press key to set and return to the menu mode.
V/M
After programming, the alphanumeric tag will be displayed on the
designated channels, instead of the frequency, when in memory
mode. The memory channel number and other status icons will
also be displayed. If you wish to see the programmed frequency,
press and it will be displayed. To return to the alphanumeric
FUNC
display, press any key.
If the display remains unchanged, follow the instruction of menu
3 and select NM.
key to erase all characters. Up
CALL
key to cancel operation and exit.
TS/DCS
„ „

MEMORY DISPLAY INDICATOR

Switch the frequency display and memory name display when a memory
name is registered using the memory name function.
1. Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "03".
The current setting will appear on the
display.
The default setting is "FRQ" (frequency
display).
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are as follows.
▼ NM: Displays the memory name (Default).
FRQ: Displays the frequency.
▼
Regardless of the NM setting, frequency is always displayed on
channels that name tags are not programmed.
3.
Press the dial.
The unit will go back to menu mode.
„ „

BEEP

Set whether or not to sound the operation beep.
1.
Rotate the dial or press the [UP]/
[DOWN] keys on the microphone to
display the menu number "04".
The current setting will appear on the display.
The default setting is "BEEPON".