Press; Key Until Icon Appears Then Press; The Following Key; Func - Alinco DR-B185HT Instruction Manual

NO. KEY FUNCTION
• In VFO mode/memory mode
Press and hold for 2 seconds to enter
parameter setting mode.
4

FUNC

• In channel display mode
Operation is invalid.
Press and hold for 1 second to activate the
8
SQL
monitoring function. Press again to stop.
• In VFO mode
Starts MHz scan.
9 Dial
• In memory mode/channel display mode
Starts group scan.
„ „

Press

key until
FUNC
following key.
NO. KEY FUNCTION
4 Exits from the function mode.
FUNC
• In VFO mode
Stores a frequency on a memory channel.
5
• In memory mode/channel display mode
V/M
Set a skip channel stored on a memory
channel.
• In VFO mode/memory mode
Sets the operation lock function.
6
TS/DCS
• In channel display mode
Exits from function mode.
7 Sets transmission output.
CALL
icon appears then press the
Getting Acquainted
NO. KEY FUNCTION
8 Sets the reverse function.
SQL
• In VFO mode/memory mode
Rotate to select a channel.
Press to set the shift function.
9 Dial
• In channel display mode
Rotate to exit from function mode.
Press to set the shift function.
„ „
Press key and following key together to activate
FUNC
following function:
NO. KEY FUNCTION
• In VFO mode/channel display mode
Operation is invalid.
5
V/M
• In memory mode
Deletes a memory channel.
• In VFO mode/memory mode
Sets the automatic dialer.
6
TS/DCS
• In channel display mode
Operation is invalid.
7 Enters clone function mode. (Turn off to exit.)
CALL
8 Switches to power supply voltage display mode.
SQL
Pressing switches to the 2Tone setting.
9 Dial
(Pre-setting required)
3
8