Table of Contents
Advertisement
Basic Operations
Channel name (Alphanumeric) registration function
The memory channels stored in the memory mode can be displayed with an alphanumeric tag
instead of the default frequency display. There are 67 characters available including A-Z, 0-9.
1.
In the memory mode, select a channel to be
programmed.
2.
Press the H/L key together with the FUNC key.
3.
The display shows [A ] flashing.
4.
Rotate the dial to select a character to be pro-
grammed.
5.
By pressing the BAND key, the character is il-
luminated and entered.
An identical character to the one just entered
flashes on the immediate right ready to be ed-
ited.
6.
Enter with the BAND key. (Repeat the same
sequence)
7.
Pressing the CALL key during programming
will delete all characters to be programmed.
8.
Pressing any key other than the BAND key and
the CALL key will complete the setting and the
display will return to the original status.
NOTE:
22
In the memory mode, a designated alphanumeric tag is displayed instead of the frequency
for a channel with a designated channel name (CH number is displayed unchanged). By
pressing the FUNC key for 5 seconds, the frequency will be displayed.
(By pressing any key during operation, the display will return to show a channel name. But
by operating a key designated for some FUNC key, the unit will enter the designated
setting mode.)
Advertisement
Table of Contents
