Message Displayed When Turning On The Power; Setting The Message Displayed When Truning On The Power; Bclo Setting - Alinco DR-B185HT Instruction Manual

The options are as follows.
OFF: Does not set the auto power off function.
▼
10 (min) to 60 (min) /6 steps in 10 minute increments:
▼
Automatically turns off the power after the set time has elapsed.
3. Press the dial.
The unit will go back to menu mode.
„ „

MESSAGE DISPLAYED WHEN turning ON THE POWER

Set whether or not to display the message when turning on the power.
1. Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "10".
The current setting will appear on the
display.
The default setting is "MDL".
2. Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are as follows.
OFF: Switches to receiving mode immediately.
▼
MDL:
▼
Displays the "DR-B185" for 2 seconds, then switches to receiving
mode.
▼ MSG:
Displays the message set in the next chapter, then switches to
receiving mode.
3. Press the dial.
The unit will go back to menu mode.
PARAMETER SETTING MODE
„ „

SETTING THE MESSAGE DISPLAYED WHEN TRUNING ON THE POWER

Set the message displayed when turning on the power.
1. Rotate the dial or press the [UP]/
[DOWN] keys on the microphone to
display the menu number "11".
2. By refering to the Menu 2 on P.23, edit
the message to display.
3.
Press the dial.
The unit will go back to menu mode.
„ „

BCLO SETTING

BCLO stands for Busy Channel Lock Out, and prohibits transmission that
may cause interferences to ongoing communications. Transmission is
possible only in the conditions:
• When the channel is free and clear (BUSY icon is not displayed).
• The CTCSS/DCS setting of receiving signal is different from the current
tone setting.
1. Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "12".
The current setting will appear on the
display.
The default setting is "OFF".
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are as follows.
ON: Sets the BCLO setting to ON.
▼
OFF: Sets the BCLO setting to OFF.
▼
7
26