Maintenance; Default Setting After Resetting Dr-B185; To Reset; Trouble Shooting - Alinco DR-B185HT Instruction Manual

„ „

Default Setting after Resetting DR-B185

DR-B185
VFO frequency 145.000MHz
Memory channel C (CALL)
-
Offset direction
Offset frequency 600KHz
HT: 5KHz
Channel step
HE: 12.5KHz
-
CTCSS encode and decode
Optional functions will be basically deactivated and programmed values
are erased.
„ „

To reset

Perform the reset to resume default setting, 2 reset modes are available.
SYSTEM reset
Resumes default setting without erasing memory channel data.
Turn off. Turn on with
FUNC
displayed. Release the key and wait until 145.000 is displayed.
ALL reset
Resumes default setting and clears the memory data. The deleted
memory data can't be recalled.
Turn off. Turn on with and
FUNC
All LCD segments will be displayed. Release keys and wait until 145.000
is displayed.
R e s e t i s n o t a v a i l a b l e i n C h a n n e l d i s p l a y m o d e , o r
preprogrammed using PC utility software.
CTCSS
88.5Hz
frequency
DCS encode
-
and decode
DCS code 023N
Output power HI
Key-lock setting OFF
TOT OFF
APO OFF
key pressed.All LCD segments will be
keys pressed together.
CALL
„ „

Trouble Shooting

Problem
(a) Power is on, nothing
appears on Display.
(b) Fuse is blown.
(c) Display is too dim.
(d) No sound comes from
speaker.
(e) Key and Dial do not
function.
(i) Rotating Dial will not
change memory channel.
(g) [PTT] key is pressed but
doesn't transmit.
Please contact your dealer when a technical assistance may be
necessary.

Maintenance

Possible Causes and Potential Solutions
+ and - polarities of power connection
are reversed. Connect red lead to plus
terminal and black lead to minus terminal of
DC power supply.
Check and solve problem resulting in blown
fuse and replace fuse with a new one.
Set the LCD backlight parameter properly.
• Squelch level too high. Decrease squelch level.
• Selective-calling like TSQ activated. Press
[Moni] key to monitor.
Key-lock function is activated. Cancel Key-lock
function.
Transceiver is in CALL mode. Press
• Microphone connection is poor. Connect
microphone properly.
• Antenna connection is poor. Connect antenna
properly.
9
.
38