Alinco DR-B185HT Instruction Manual page 22

4
Operating Modes (VFO Mode, Memory Mode, Channel Display Mode)
[Memory programming]
1.
Return to VFO mode by pressing
or A key.
Referring to the list below for the
programmable parameters, program in the VFO mode to the
desired frequency and settings to be stored later in the memory.
2.
When all the settings are complete, press
The , and icons appear and a
memory channel character will be
indicated on the display.
3. Rotate the dial or press the [UP]/
[DOWN] keys to select the desired memory channel into which the
current VFO settings will be copied.
An empty channel is shown with a
13
flashing icon. It may be a good
practice to "allocate" memory channels
in order, such as 0-9 for local repeaters,
10-19 local simplex, 20-49 repeaters within the area, etc. It makes
references easier for the group scan feature explained in the
scanning function.
4.
While icon is still on the display, press
The VFO settings are copied to the memory channel and a beep
will sound twice. The memory channel can be over-written if a
previously programmed channel is selected (the memory channels
shown with a stable
Memory channel characters include C, P1, P2, PR and channel
numbers (0-499). Meanings of alphabetical characters will
follow.
V/M
key.
FUNC
key.
V/M
icon).
SPECIAL MEMORY CHANNELS
To program the CALL channel (quick recall) select the channel shown
with C on the display.
P1 and P2 for Program scan,and PR for Priority operation settings which
instructions will follow.
Deleting a Memory Channel
1.
To delete a programmed channel, select
it in memory mode, press
keys together while
V/M
The memory is deleted and a beep
sounds. The icon starts flashing
showing that this channel is now empty.
2.
To undo delete, press
V/M
this state.
However, the Undo function becomes impossible once the channel
or the mode is changed.
Programmable data in the memory channel
Some features will be explained later, so please read this instruction
manual thoroughly prior to programming memories.
Memory channels including 0 - 499, P1, P2, PR and CALL can store
following:
• Frequency
• Name
• Shift frequency
• Shift direction
and
FUNC
icon is on.
key only at