7
PARAMETER SETTING MODE
3.
Press the dial.
The unit will go back to menu mode.
OFFSET FREQUENCY
U s i n g t h i s f u n c t i o n , t h e t r a n s m i s s i o n
frequency can be shifted by the offset
frequency range set for the reception
frequency.
Please refer P.20 for the shift direction (Press
dial will switch the direction).
1.
Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "13".
The default setting is "0.6000" (0.6MHz).
2.
The options are 0 to 99.9950MHz in accrodance with preset
27
channel step.
The adjustment step depends on the step setting value.
3.
Press the dial.
The unit will go back to menu mode.
VFO UPPER LIMIT
* This menu appears only in VFO mode.
* Not available in HE version.
This is to set the upper limit of the VFO. By setting this, dial and [UP]/
[DOWN] operation will be limited up to the programmed frequency.
Setting changes will not affect memory channels and
programmed scanning range.
1.
Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "14".
The current setting will appear on the
display.
The default setting is "174" (174MHz).
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
The options are between 174 and 137MHz in 1MHz step.
key then the
FUNC
This value should be higher than the frequency set in the next
chapter.
3.
Press the dial.
The unit will go back to menu mode.
VFO LOWER LIMIT
* This menu appears only in VFO mode.
* Not available in HE version.
Set the lower limit frequency used in VFO mode.
1.
Rotate the dial or press the [UP]/[DOWN] keys on the microphone
to display the menu number "15".
The current setting will appear on the
display.
The default setting is "136" (136MHz).
2.
Press dial to display SET, then rotate dial or press the [UP]/[DOWN]
keys on the microphone to change the setting.
Setting changes will not affect memory channels and
programmed scanning range.