Memory To Vfo Data Transfer; Introduction; Procedure; Channel Name (Alphanumeric) Registration Function - Alinco DX-SR8 Instruction Manual

3.7 Memory To VFO Data Transfer

Introduction

This function copies data from any memory channel to the VFO. This is useful when you
wish to tune in a station near the frequency stored in a memory channel.

Procedure

Example: Copying data in memory channel "06" into the VFO A
1.
Press the [ / ] keys to select memory
channel "06" in the memory mode.
2.
Press the [FUNC] key, then press the [2] key.
While [VFO] icon is fl ashing, use [ / ]
keys to select VFO A or B to copy the data,
then press [2] key to complete.

3.8 Channel Name (Alphanumeric) Registration Function

The memory channels stored in the memory mode can be displayed with an alphanumeric tag
instead of the default frequency display. There are 67 characters available including A-Z, 0-9.
1.
In the memory mode, select a channel to be
programmed.
2.
Press the [FUNC] key, then press the [ENT]
key.
3.
The display shows [A] fl ashing.
4.
Turn the Main dial or press the [ / ] keys
to select a character to be programmed.
5.
By pressing the [ENT] key, the character
stops fl ashing and is entered.
An identical character to the one just entered
fl ashes on the immediate right ready to be
edited.
NOTE: After transfer, the original data still
remains in the memory channel.
Chapter 3 Memory Features
53