Mvr Port Type - Planet Networking & Communication IGSW-24040T User Manual

Parameters:
<vid>: VLAN ID (1-4095), default: Show current MVR multicast VLAN ID
Default Setting:
100
Example:
Set VLAN 1000 for MVR multicast VLAN ID.
SWITCH/>mvr multicast vlan 1000

MVR Port Type

Description:
Set or show MVR port type.
Syntax:
MVR Port Type [<port_list>] [source|receiver]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Enable source mode
source
: Disable receiver mode
receiver
(default: Show MVR port type)
Default Setting:
receive
Example:
Set source type for MVR port type of port 1.
SWITCH/>mvr port type 1 source
MVR Immediate Leave
Description:
Set or show MVR port state about immediate leave.
Syntax:
473
User's Manual of IGSW-24040T