Enabled
IP Address/Hostname
Port
Secret
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object
#
Enabled
IP Address/Hostname
Port
Secret
Buttons
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
applies.
Enable the RADIUS Accounting Server by checking this box.
The IP address or hostname of the RADIUS Accounting Server. IP address is
expressed in dotted decimal notation.
The UDP port to use on the RADIUS Accounting Server. If the port is set to 0
(zero), the default port (1813) is used on the RADIUS Accounting Server.
The secret - up to 29 characters long - shared between the RADIUS Accounting
Server and the switch.
Description
The TACACS+ Authentication Server number for which the configuration below
applies.
Enable the TACACS+ Authentication Server by checking this box.
The IP address or hostname of the TACACS+ Authentication Server. IP address
is expressed in dotted decimal notation.
The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
232
User's Manual of IGSW-24040T