Planet Networking & Communication IGSW-24040T User Manual page 173


STEP-2
According to your selection on the previous page, this wizard will create specific QCEs (QoS Control Entries) automatically.
First select the QCL ID for these QCEs, and then select the traffic class. Different parameter options are displayed depending on
the frame type that you selected.
The page includes the following fields:
Object

QCL ID

Traffic Class
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
Figure 4-9-4 Set up Typical Network Application Rules Page 2 Screenshot
Description
Select the QCL ID to which these QCEs apply.
Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
173
User's Manual of IGSW-24040T