The page includes the following fields:
Object
Port
Policer Enabled
Policer Rate
Policer Unit
Figure 4-9-10 Rate Limit Configuration Page Screenshot
Description
The logical port for the settings contained in the same row.
Enable or disable the port policer. The default value is "Disabled".
Configure the rate for the port policer. The default value is "500". This value is
restricted to 500-1000000 when the "Policer Unit" is "kbps", and it is restricted to
1-1000 when the "Policer Unit" is "Mbps"
Configure the unit of measure for the port policer rate as kbps or Mbps. The
182
User's Manual of IGSW-24040T