Led Indications - Planet Networking & Communication IGSW-24040T User Manual

Reset Button Pressed and Released
< 5 sec: System reboot
> 5 sec: Factory Default

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when
needed. Figure 2-2 shows the LED indications of these Managed Switch.
IGSW-24040T LED indication
■ System
LED Color
DC1 Green
DC2 Green
Fault Green
PWR Green
Function
Reboot the Managed Switch
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。
。
。
。
。
Figure 2-2 IGSW-24040T LED Panel
Lights to indicate that the Switch is powered on by DC1 input.
Lights to indicate that the Switch is powered on by DC2 input.
Lights to indicate that Switch AC/DC or port has failed.
Lights to indicate that the Switch is powered on.
Blink to indicate the System is running under booting procedure.
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
Function
28
User's Manual of IGSW-24040T