Turning Phantom Power On Or Off; Adjusting The Preamp Gain - Roland M-5000 Quick Start Manual

Overview of Operations

Turning Phantom Power On or Off

1.
Access the CH EDIT window for the desired input channel.
0"Access the CH EDIT window" (p. 48)
2.
Tap the <INPUT tab>.
INPUT tab
3.
Tap <+48V>.
* Always turn the phantom power off when connecting any
device other than condenser microphones that require
phantom power. You risk causing damage if you mistakenly
supply phantom power to dynamic microphones, audio
playback devices, or other devices that don't require such
power. Be sure to check the specifications of any microphone
you intend to use by referring to the manual that came with it.
(This instrument's phantom power: DC+48 V, 14 mA Max)
Memo
To prevent occurrence of noise, input is briefly muted when
phantom power is turned on or off.
50

Adjusting the Preamp Gain

1.
At the HOME screen, go to the knob-assign area and tap
<GAIN>.
2.
Adjust the preamp gain in the top row of the knob
section.
knob-assign area