4 Permanent settings in programming mode
Display settings
Unit for amount of water
32
g T Turn the Rotary Switch to adjust the water hardness.
T Press the
'Save'
'Saved'
appears briefly on the display.
'Maintenance settings'
O T Press the P button to exit programming mode.
'Please select product'
In the programme item
set the display brightness and contrast (as a percentage).
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the
'Display'
'Display'
g T Turn the Rotary Switch to change the display setting.
T Press the
'Save'
'Saved'
appears briefly on the display.
'Machine settings'
O T Press the P button to exit programming mode.
'Please select product'
In the programme item
select the unit used for the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from
'ml'
to 'oz'.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the
'Units'
'Units'
T Press the
'oz'
button.
'Machine settings'
is displayed.
('1/7')
'Machine settings'
button.
button.
'Machine settings'
is displayed.
('1/7')
'Machine settings'
button.
button.
('5/7') /
'Display'
you can
('5/7') is dis-
('5/7') /
'Units'
you can
('5/7') is dis-