Table of Contents
Advertisement
4 Permanent settings in programming mode
Energy-saving mode
Maintenance settings
30
In the programme item
can permanently set an energy-saving mode (Energy Save Mode,
E.S.M.
©
):
U
'Active'
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
played.
U
Before you can prepare a speciality coffee, speciality coffee
with milk, or hot water, the machine must heat up.
U
'Inactive'
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
Example: Proceed as follows to change the energy-saving mode
from
'Active'
to 'Inactive'.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the
'Save energy'
'Save energy'
T Press the
'Inactive'
T Press the
'Save'
'Saved'
appears briefly on the display.
'Machine settings'
O T Press the P button to exit programming mode.
'Please select product'
In the programme item
the following settings:
U
'Use filter'
U
Activate the CLARIS Blue filter cartridge (see Chapter 5
'Maintenance – Inserting and activating the filter').
U
'Water hardness'
U
If you do not have a filter cartridge, you will need to set the
water hardness (see Chapter 4 'Permanent settings in pro-
gramming mode – Setting the water hardness').
'Machine settings'
('4/7') /
is displayed.
('1/7')
'Machine settings'
button.
button.
button.
'Maintenance settings'
(only if filter is not activated)
'Save energy'
you
'Energy Save'
is dis-
('4/7') is dis-
('6/7') you can make
Advertisement
Table of Contents
