Permanent Settings In Programming Mode - IMPRESSA F8 Instructions For Use Manual

4 Permanent settings in programming mode

Programme item
'Maintenance status'
('1/7' and '2/7')
'Product settings' ('3/7')
'Machine settings'
('4/7')
'Machine settings'
('5/7')
'Maintenance settings'
('6/7')
'Information' ('7/7')
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Sub-item
'Clean',
'Change the filter' (only
if filter is activated),
'Descale' (only if filter is
not activated),
'Cappuccino cleaning',
'Rinse the coffee
system',
'Rinse the milk system'
'Expert mode',
'Factory setting'
'Choose language',
'Switch off after',
'Save energy',
'Factory setting'
'Units',
'Display'
'Use filter',
'Water hardness' (only
if filter is not activated),
'Switch-on rinse'
'Product counter',
'Maintenance counter',
'Version'
4 Permanent settings in programming mode
Explanation
T Start the required maintenance pro-
gramme here.
T Select your settings for speciality coffees
and hot water.
T Reset the settings for single products to
their factory setting.
T Select your language.
T Set the time after which the IMPRESSA
should switch off automatically.
T Select an energy-saving mode.
T Reset the machine to its factory setting.
T Select the unit for the amount of water.
T Change the display settings.
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue
filter cartridge.
T Adjust the water hardness.
T Change the settings for switch-on rinse.
T Keep track of all products prepared and
view the number of maintenance pro-
grammes performed and the maintenance
status.
25