Table of Contents
Advertisement
5 Maintenance
Rinsing the fine foam
frother
Cleaning the fine foam
frother
CAUTION
36
E This chapter applies to the professional fine foam frother and
the fine foam frother.
After each milk preparation, the IMPRESSA prompts you to perform
a cappuccino rinse.
Precondition: 'Rinse the milk system'
T Place a receptacle under the fine foam frother.
k T Press the Rotary Switch.
'Switch open'
l T Turn the switch to the m position.
'Milk system is being
The rinse stops automatically.
display.
y T Turn the switch to the ° position.
'Please select product'
E This chapter applies to the professional fine foam frother and
the fine foam frother.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk. Your
IMPRESSA will not prompt you to clean the fine foam frother.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
T Press the
'Cappuccino cleaning'
T Press the
'Start'
T Press the
'Start'
'Cleaner for Cappuccino'
T Remove the milk pipe from the milk container or carton.
T Pour 250 ml of fresh water into a receptacle and add one
capful of milk system cleaner .
is displayed.
rinsed', the fine foam frother is rinsed.
'Switch close'
appears on the display.
is displayed.
('1/7')
button.
button.
button again.
appears on the
Advertisement
Table of Contents
