Table of Contents
Advertisement
4 Permanent settings in programming mode
Product settings
Adjusting the product
settings
Product
Coffee strength
Ristretto,
; (mild),
Espresso,
;; (normal),
Coffee,
;;; (strong),
Special coffee
;;;; (extra-strong)
2 ristretti,
2 espressi,
2 coffees
Cappuccino,
; (mild),
Espresso
;; (normal),
macchiato,
;;; (strong),
Latte macchiato
;;;; (extra-strong)
Portion of milk
foam,
Hot water
26
In the programme item
following settings:
U
'Expert mode'
U
Set individual settings for all speciality coffees, milk and hot
water (see Chapter 4 'Permanent settings in programming
mode – Adjusting the product settings').
U
Replace the products on the start screen with your favour-
ites (see Chapter 4 'Permanent settings in programming
mode – Replacing products on the start screen').
U
Change the names of individual products (see Chapter 4
'Permanent settings in programming mode – Renaming a
product').
U
'Factory setting'
U
Reset the set values for individual products to their factory
setting.
In the programme item
can make individual settings for all speciality coffees and hot water.
The following permanent settings can be made:
Amount
Amount of coffee:
25 ml – 240 ml
–
Amount of coffee: the
amount set for the single
product is doubled.
Amount of coffee:
25 ml – 240 ml
Milk foam:
0 sec. – 120 sec.
Interval: 0 sec. – 120 sec.
–
Milk foam:
0 sec. – 120 sec.
–
Water: 25 ml – 450 ml
'Product settings'
('3/7') you can make the
'Product settings'
('3/7') /
More settings
Temperature (normal,
high),
product name
Temperature (as for single
product),
product name
Temperature (normal,
high),
product name
Product name
Temperature (low, normal,
high),
product name
'Expert mode'
you
Advertisement
Table of Contents
