IMPRESSA F8 Instructions For Use Manual page 40

5 Maintenance
40
Precondition: 'Change the filter'
O T Press the P button.
'Maintenance status'
T Press the 'Change the filter'
'Change the filter'
T Press the
'Start'
T Press the 'Start'
'Change filter'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge.
T Insert a new CLARIS Blue filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 300 ml) under the fine foam
frother.
T Press the 'Next'
'Switch open'
l T Turn the switch to the m position.
'Filter is being
frother.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300 ml. 'Switch close'
y T Turn the switch to the ° position.
'Please select product'
is displayed.
('1/7')
button.
button.
button again.
button.
rinsed', water flows out of the fine foam
appears on the display.
appears on the display.