Inserting And Activating The Filter - IMPRESSA F8 Instructions For Use Manual

5 Maintenance
Inserting and activating
the filter
38
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in JURA milk system
cleaner and then rinse them thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector Sys-
tem © .
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If you did not activate the filter cartridge
the first time you used the machine, you can do this now as follows.
E Perform the 'inserting the filter' operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
displayed.
T Press the 'Use filter'
'Use filter'
T Press the 'Active'
T Press the 'Save'
'Saved' appears briefly on the display.
'Insert filter'
T Remove and empty the water tank.
T Open the filter holder.
T Remove the CLARIS Blue filter cartridge from the Welcome
Pack.
is displayed.
('1/7')
'Maintenance settings'
button.
button.
button.
('6/7') is