Replacing Products On The Start Screen - IMPRESSA F8 Instructions For Use Manual

Replacing products on
the start screen
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
coffee from ' normal ' (;;) to 'strong' (;;;).
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
T Press the 'Expert mode'
'Expert mode'
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T Press the
' > '
played.
T Press the
'Coffee'
'Coffee'
T Press the
'Coffee strength'
'Coffee' / 'Coffee strength'
g T Turn the Rotary Switch to change the coffee strength set-
ting.
T Press the
'Save'
'Saved' appears briefly on the display.
'Coffee'
O T Press the P button to exit programming mode.
'Please select product'
You have the option of replacing the four products on the start
screen with your personal favourites.
Example: Proceed as follows to replace
screen with 'Macchiato'.
Precondition: 'Please select product'
O T Press the P button.
'Maintenance status'
g T Turn the Rotary Switch until
played.
4 Permanent settings in programming mode
is displayed.
('1/7')
'Product settings'
button.
button (bottom right) until
button.
button.
button.
'Cappuccino'
is displayed.
('1/7')
'Product settings'
('3/7') is dis-
'Coffee' is dis-
on the start
('3/7') is dis-
27