Milk Foam - IMPRESSA F8 Instructions For Use Manual

2 Preparation

Milk foam

18
y T Turn the switch to the ° position.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically.
appears on the display.
E If preparing a latte macchiato, slide the glass under the coffee
spout after closing the switch.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk (see Chap-
ter 5 'Maintenance – Cleaning the fine foam frother'). Your IMPRESSA
will not prompt you to clean the fine foam frother.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
E With the professional fine foam frother, available as an
optional accessory, you can also prepare hot milk.
Example: Proceed as follows to prepare milk foam.
Precondition: 'Please select product'
T Place a cup under the fine foam frother (figure: Optional
JURA Cool Control Basic 0.6 l).
E Ensure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
E If you are using the professional fine foam frother, turn the
selector switch to the Milk Foam position é.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the
is in focus.
k T Press the Rotary Switch to start preparation.
'Portion milk foam'
As soon as the machine has heated up,
appears.
'Please select product'
is displayed.
'Portion milk foam'
'Switch open'
product