Connecting Milk; Filling The Water Tank - IMPRESSA F8 Instructions For Use Manual

1 Preparing and using for the first time

Connecting milk

Filling the water tank

CAUTION
14
Your IMPRESSA creates fine, creamy, feather-light milk foam with a
perfect consistency. The most important requirement for frothing
milk is a milk temperature of 4–8 °C. We would therefore recom-
mend using a milk cooler or a vacuum milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother. Use the short
pipe for a milk container and the long pipe for a milk carton.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.