IMPRESSA F8 Instructions For Use Manual page 43

T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Agent in tank'
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a receptacle holding 500 ml of lukewarm
water. This may take several minutes.
T Pour the solution into the empty water tank and insert it into
the machine.
'Switch open'
T Carefully remove the fine foam frother from the Connector
System © by twisting slightly.
T Place a receptacle (at least 500 ml) under the Connector Sys-
tem © .
l T Turn the switch to the m position.
'Machine is being
tor System several times.
©
The operation is interrupted,
y T Turn the switch to the ° position.
'Machine is being
tinued.
The operation is interrupted,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Fill water tank.'
T Empty the receptacle and place it under the Connector Sys-
tem © and the coffee spout.
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'Switch open'
l T Turn the switch to the m position.
'Machine is being
tinued.
The operation is interrupted,
descaled', water flows out of the Connec-
'Switch close'.
descaled', the descaling operation is con-
'Empty drip
descaled', the descaling operation is con-
'Switch close'.
5 Maintenance
tray'.
43