Table of Contents
Advertisement
6 Display messages
Message
Cause/Result
'Fill water
The water tank is empty. You
tank.'
cannot prepare any products.
'Empty
The coffee grounds container
grounds'
is full. You cannot prepare any
products.
'Drip tray not
The drip tray is not inserted
fitted'
correctly or is not inserted at all.
You cannot prepare any products.
'Fill bean
The bean container is empty.
container'
You cannot prepare any products.
'Rinse the
The IMPRESSA requests a
milk system'
cappuccino rinse.
'Change the
The filter cartridge no longer
filter'
works.
'Clean
The IMPRESSA is prompting you
machine'
to clean it.
'Decalcify
The IMPRESSA is prompting you
machine'
to descale it.
'Not enough
There is insufficient ground coffee
ground coffee'
in the machine; the IMPRESSA
stops the operation.
'Too hot'
The system is too hot to start a
maintenance programme.
Action
T Fill the water tank (see Chapter 1 'Prepar-
ing and using for the first time – Filling the
water tank').
T Empty the coffee grounds container and
the drip tray (see Chapter 3 'Daily opera-
tion – Daily maintenance').
T Fit the drip tray.
T Fill the bean container (see Chapter 1
'Preparing and using for the first time –
Filling the bean container').
T Perform milk system rinsing (see Chap-
ter 5 'Maintenance – Rinsing the fine foam
frother').
T Replace the CLARIS Blue filter cartridge
(see Chapter 5 'Maintenance – Changing
the filter').
T Perform cleaning (see Chapter 5 'Mainte-
nance – Cleaning the machine').
T Perform descaling (see Chapter 5
'Maintenance – Descaling the machine ').
T The next time you prepare a beverage,
add more ground coffee (see Chapter 2
'Preparation – Ground coffee').
T Wait for several minutes until the system
has cooled or prepare a speciality coffee or
hot water.
6 Display messages
45
Advertisement
Table of Contents
