Descaling The Machine - IMPRESSA F8 Instructions For Use Manual

Table of Contents

Advertisement

5 Maintenance

Descaling the machine

J
CAUTION
CAUTION
CAUTION
CAUTION
42
T  Empty the drip tray and coffee grounds container and put
them back into the machine.
'Please select product'
now complete.
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T  Avoid contact with the skin or eyes.
T  Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T  Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T  Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T  Clean up any splashes immediately.
E The descaling programme lasts approximately 40 minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
Precondition: 'Decalcify machine'
  O  T  Press the P button.
'Maintenance status'
T  Press the
'Descale'
'Descale'
T  Press the
'Start'
T  Press the
'Start'
'Empty drip tray'
appears on the display. Cleaning is
is displayed.
('1/7')
button.
button.
button again.

Advertisement

Table of Contents
loading

Table of Contents