ZyXEL Communications LTE3301 Series User Manual page 48

Table 12 Monitor > LTE Modem Status (continued)
LABEL DESCRIPTION
RSRP This displays the Reference Signal Receive Power (RSRP), which is the average received
power of all Resource Elements (RE) that carry cell-specific Reference Signals (RS)
within the specified bandwidth.
RSRQ This displays the Reference Signal Received Quality (RSRQ), which is the ratio of RSRP
to the E-UTRA carrier RSSI and indicates the quality of the received reference signal.
SINR This displays the Signal to Interference plus Noise Ratio (SINR). A negative value
means more noise than signal.
PLMN This displays the Public Land Mobile Network (PLMN) code of the mobile network.
MIMO This displays the MIMO (Multi-input Multi-output) technology supported by the
LTE3301, such as 1T2R (1 Transmit and 2 Receive paths/antennas) or TM1-TM4
(Transmission Mode 4).
Support Band List This displays the frequency bands that are supported by the LTE3301.
Chapter 5 Monitor
LTE3301 Series User's Guide
48