ZyXEL Communications LTE3301 Series User Manual page 20

The following table describes the sub-menus.
Table 6 Navigation Panel
LINK TAB
Status
Monitor
Log
DHCP Table
Packet Statistics
WLAN Station
Status
LTE Modem
Status
Configuration
Network
WAN Management
WAN
Network
Scan
IPv6
Wireless LAN General
More AP
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
WDS
LAN IP
DHCP Server General
Advanced
Client List
NAT General
Port
Forwarding
Port Trigger
ALG
Chapter 2 Introducing the Web Configurator
FUNCTION
This screen shows the LTE3301's general device, system and interface
status information. Use this screen to access the summary statistics tables.
Use this screen to view the list of activities recorded by your LTE3301.
Use this screen to view current DHCP client information.
Use this screen to view port status and packet specific statistics.
Use this screen to view the wireless stations that are currently associated
to the LTE3301's 2.4GHz wireless LAN.
Use this screen to view the detailed information about the LTE module,
cellular interface, and SIM card. You can also view the LTE connection
status.
This screen allows you to configure ISP parameters, WAN IP address
assignment, and DNS servers.
Use this screen to specify the type of the mobile network to which the
LTE3301 is connected and how you want the LTE3301 to connect to an
available mobile network.
Use this screen to configure the LTE3301's IPv6 settings.
Use this screen to enable the wireless LAN and configure wireless LAN and
wireless security settings.
Use this screen to configure multiple BSSs on the LTE3301.
Use the MAC filter screen to allow or deny wireless stations based on their
MAC addresses from connecting to the LTE3301.
This screen allows you to configure advanced wireless LAN settings.
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
Use this screen to configure the WPS settings.
Use this screen to add a wireless station using WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to enable and configure the WDS settings.
Use this screen to configure LAN IP address and subnet mask.
Use this screen to enable the LTE3301's DHCP server.
Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Use this screen to view information related to your DHCP status.
Use this screen to enable NAT.
Use this screen to configure servers behind the LTE3301 and forward
incoming service requests to the server(s) on your local network.
Use this screen to change your LTE3301's port triggering settings.
Use this screen to enable or disable SIP (VoIP) ALG (Application Layer
Gateway) in the LTE3301.
LTE3301 Series User's Guide
20