Care And Cleaning; Specific Reasons For Erroneous Measuring Results - ADA INSTRUMENTS 2D Basic Level Operating Manual

Ada laser level operating manual

Hide thumbs Also See for 2D Basic Level:

Table of Contents

Available languages

CARE AND CLEANING

Please handle measuring instrument with care. Clean with soft cloth only after any use. If necessary damp cloth with some

water. If instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original container/case only.

Note: During transport On/Off compensator lock (3) must be set to position "OFF". Disregard may lead to damage of compen-

sator.

•

Measurements through glass or plastic windows;

•

Dirty laser emitting window;

•

After instrument has been dropped or hit. Please check the accuracy.

•

Large fluctuation of temperature: if instrument will be used in cold areas after it has been stored in warm areas (or the

other way round) please wait some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

•

It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems);

•

will be disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio trans-

mitters).

BASIC LEVEL

MEASUREMENT FOUNDATION

Table of Contents

Do you have a question about the 2D Basic Level and is the answer not in the manual?