Care And Cleaning; Speciic Reasons For Erroneous Measuring Results - ADA INSTRUMENTS 5D CROSSPOINT Operating Manual

Care and cleaning

Please handle measuring instrument with care. Clean with soft cloth only after any use. If necessary damp cloth with some water.
If instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original container/case only.
Note: During transport On/Off compensator lock (3) must be set to position "OFF". Disregard may lead to damage of compensa-
tor.

Speciic reasons for erroneous measuring results

Measurements through glass or plastic windows.
•
Dirty laser emitting window.
•
After instrument has been dropped or hit. Please check the accuracy.
•
Large luctuation of temperature: if instrument will be used in cold areas after it has been stored in warm areas (or the other
•
way round) please wait some minutes before carrying out measurements.
5D CROSSPOINT
2
MEASUREMENT FOUNDATION