Care And Cleaning; Specific Reasons For Erroneous Measuring Results; Laser Classification - ADA INSTRUMENTS TOPLINER 3-360 GREEN Operating Manual

11
English

CARE AND CLEANING

Please handle measuring instrument with care. Clean with soft cloth only
after any use. If necessary damp cloth with some water. If instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container/case only.
Note: During transport On/Off compensator lock (5) must be set to position
"OFF". Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After instrument has been dropped or hit. Please check the accuracy.
• Large fluctuation of temperature: if instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
• It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic
radiation nearby industrial facilities or radio transmitters).

LASER CLASSIFICATION

The instrument is a laser class 2 laser product accortding to DIN IEC 60825-
1:2007. It is allowed to use unit without further safety precautions.
Note: Because of construction of laser emitter laser beam may be unhomo-
geneous and has different intensity of brightness along the perimeter in
different light conditions. Unhomogeneous of laser beam: laser patch of light
but the center of laser beam is identified. Different laser beam brightness:
difference of intensity is up to 50%.