Table of Contents
Advertisement
MK-377 SAW
CLEANUP
NOTE:
Dispose of wastewater in accordance with applicable Federal, State and Local laws.
(A)
Ensure the ON/OFF Switch is
in the OFF position. Remove
the Cutting Assembly from the
Water Pan
CAUTION
(D)
Fill the Water Pan with
clean water
CAUTION
(G)
Clean the Guide Bar
Dispose of the contents of
the Water Pan and clean
the pan. Replace the
Ensure the saw is disconnected before completing the remainder of the
cleanup process.
Run the MK-377 until clear
water is seen at the blade
cooling ports (Approx. 1
To extend the life of the MK377, lubricate the Motor Shaft with light oils such
as, 3 in 1, WD-40, etc.
Clean the Roller Wheel
(B)
Cutting Assembly.
(E)
minute)
(H)
Guide Rail
21
MAINTENANCE
(C)
Clean the Water Pump of all
debris. (Refer to water pump
manual for more detail)
(F)
Dispose of the contents of
the Water Pan and clean the
MK-377 with soap and clear
water
(I)
Clean the Roller Wheels
Advertisement
Table of Contents
