Table of Contents
Advertisement
MK-377 SAW
CAUTION
To extend the life of th MK-377, the following procedure should be performed after
each use. Lubricate all points listed below with light oils such as, 3 in 1, WD-40, etc.
(J)
Lubricate the Guide Bar
LOCKOUT
The MK-377 is equipped with a lockout device that can be used during maintenance and troubleshooting
to render the saw in operable. The lockout can also be used to prevent unauthorized use.
(A)
Locate the Lockout Pin in the
center of the ON/OFF Switch
toggle (the Lockout Pin has
"Remove To Lock" highlighted)
MAINTENANCE
Monthly Maintenance
The following maintenance should be performed monthly.
(A)
Remove and clean the Inner and
Outer Flanges and the Blade
Retaining Nut
(K)
Lubricate the Roller teel
Assembly
(B)
Lockout the Saw by removing
the Lockout Pin
(B)
Clean the Motor Shaft
22
MAINTENANCE
(C)
Lubricate the Motor Shaft
Advertisement
Table of Contents
