MK-377 SAW
(D)
Place the Blade Wrench on the
Blade Retaining Nut and remove
the Blade Retaining Nut and
Outer Flange
(G)
Install the Outer Flange and
Retaining Nut; install the Shaft
Wrench and Blade Wrench as
shown in Steps C and D and
tighten the Retaining Nut
(E)
Install Diamond Blade onto
Blade Shaft
(H)
Close the Blade Guard and
tighten the Blade Guard
Retaining Knob
16
INSTALLATION
(F)
Verify the Directional Arrow of
the Blade faces outward and
matches the Directional Arrow of
the Blade Guard
(I)
Tighten the Blade Guard
Retaining Wingnut